Space Needle
Contents |
[edit] Introduction
The Space Needle is an observation tower located in Seattle, Washington, built for the 1962 World’s Fair. The tower is a major tourist attraction and in 1999 was registered as an official Seattle landmark.
The artist Edward E. Carlson came up with a concept design for a dominant central structure for the World’s Fair, inspired by the Stuttgart Tower. One of his early sketches resembled a tethered balloon, while another was a balloon-shaped house on a central column anchored by cables. In the end, the futuristic design was a compromise between Carlson and the architect John Graham who turned the balloon design into a flying saucer. Victor Steinbrueck was responsible for introducing the tower’s hourglass profile.
The tower is 184 m (605 ft) high, 42 m (138 ft) wide, and weighs 9,550 tons. It includes the SkyCity revolving restaurant at 150 m (500 ft), and an observation deck at 160 m (520 ft).
[edit] Construction
The Howard S. Wright Construction Company managed the construction process which was completed in less than a year at a cost of $4.5 million.
An underground foundation was poured 9.1 m (30 ft) deep by 37 m (120 ft) wide. It took 467 concrete trucks one full day to complete what was, at the time, the largest continuous concrete pour attempted in America.
The foundation contains 250 tons of rebar, and weighs 5,850 tons. The steel needle structure is bolted to the foundation using 72 bolts, each one 9.1 m (30 ft) long.
The tower was built to withstand wind speeds of 200 mph (322 km/h), double the required standards of the time. For every 10 mph of wind the tower sways approximately 1 inch.
The five-level ‘flying saucer’ deck was balanced so that the restaurant is capable of revolving on a track-and-wheel system that weighs roughly 125 tons and only requires a 1.5 horsepower motor to operate.
[edit] Post-completion
The tower was complete in just 400 days, and officially opened on the first day of the World’s Fair in April 1962, instantly becoming an icon of the city of Seattle.
In 2000, the Space Needle underwent a $20 million renovation project. This involved a complete redevelopment of the restaurant and top levels, with the addition of exterior lighting and painting. It was also given an extensive clean, for the first time since it was originally completed.
Part of the redevelopment works was to include a spiral staircase leading to the elevator that was part of the original plans but never built. The Legacy Light, or Skybeam, was also unveiled – a powerful beam of light totaling 85 million candela that is shone skyward to mark national holidays and other notable occasions.
The Space Needle has made numerous appearances in films and TV, including ‘Sleepless in Seattle’, ‘The Parallax View’, ‘Frasier’ and ‘Grey’s Anatomy’. It also served as inspiration for the futuristic condominium that was the home of the Jetsens in the cartoon series of the same name.
[edit] Renovation
In August 2018, the Space Needle reopened to the public following an extensive overhaul by Olson Kundig Architects as part of the privately-funded preservation and renovation 'Century Project'.
The renovation work, which began in 2017, has updated the Space Needle’s physical systems and improved the visitor experience by dramatically enhancing the view:
- Floor-to-ceiling glass has been installed on the interior and exterior of the Observation Deck, opening up the 360° views of the Puget Sound area.
- New exterior glass barriers match the flow of the building, dipping outward slightly and offering a seamless sight line.
- New structural glass barriers replace the wire safety caging on the outer open-air deck.
- A new steel, timber and glass staircase spirals down from the observation deck to the restaurant, arriving at a glass oculus.
- A first-of-its-kind rotating glass floor, 'The Loupe', has been added to the restaurant level, revealing never-before-seen views of the structure below.
In total, the amount of glass has increased by 196%.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
- BT Tower.
- Building of the week series.
- CN Tower.
- Eiffel Tower.
- Emley Moor transmitting station.
- Fernsehturm Berlin.
- Gateway Arch.
- Leaning Tower of Pisa.
- Shanghai Tower.
- Tallest buildings in the world.
- The Shard.
- Unusual building design of the week.
- Watts Towers.
[edit] External references
- Space Needle - Official site
Featured articles and news
CIOB launches global mental health survey
To address the silent mental health crisis in construction.
New categories in sustainability, health and safety, and emerging talent.
Key takeaways from the BSRIA Briefing 2024
Not just waiting for Net Zero, but driving it.
The ISO answer to what is a digital twin
Talking about digital twins in a more consistent manner.
Top tips and risks to look out for.
New Code of Practice for fire and escape door hardware
Published by GAI and DHF.
Retrofit of Buildings, a CIOB Technical Publication
Pertinent technical issues, retrofit measures and the roles involved.
New alliance will tackle skills shortage in greater Manchester
The pioneering Electrotechnical Training and Careers Alliance.
Drone data at the edge: three steps to better AI insights
Offering greater accuracy and quicker access to insights.
From fit-out to higher-risk buildings.
Heritage conservation in Calgary
The triple bottom line.
College of West Anglia apprentice wins SkillELECTRIC gold.
Scottish government launch delivery plan
To strengthen planning and tackle the housing emergency.
How people react in ways which tend to restore their comfort.
Comfort is a crucial missing piece of the puzzle.
ECA launches Recharging Electrical Skills Charter in Wales
Best solutions for the industry and electrical skills in Wales.
New homebuilding skills hub launch and industry response
Working with CITB and NHBC to launch fast track training.
Comments